Home > Sheet and Plates > SS 465 Sheet and Plates
Shashank Stainless, located in Dubai, UAE, leading manufacturer and supplier of high-quality stainless steel products. They believe in excellence and offer a variety of stainless steel sheets, plates, and coils for industrial use. Among its premium offerings, Stainless Steel 465 (SS 465) is a high-strength heat-resistant alloy, which has a good performance under demanding conditions. SS 465 sheets and plates find extensive usage in aerospace and chemical processing to various power generations and applications because such sectors place maximum reliance upon extreme conditions as required.
Stainless Steel (SS) 465 is a high-performance alloy mainly consisting of iron, chromium approximately 16-18%, nickel 8-10%, and a small amount of molybdenum and carbon. It has excellent corrosion resistance and is thus used in many harsh environments. SS 465 has high strength, excellent toughness, and good formability and is thus widely used in various applications such as chemical processing, food handling, and medical devices. High tensile strength and good ductility make it useful with resistance to oxidation, providing a reliable structure for demanding industrial conditions. Available mostly in sheet and plate form.
| Standard Specification : | ASTM A240 / ASME SA240 |
| Dimensions : | ASTM, ASME, and API |
| Sheets Thickness : | Range from .008″ to .0125″ |
| Plates Thickness : | Ranges from .0125″ to 5.00″ |
| Sheets/Plates Width : | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Sheets/Plates Length : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Tempers : | Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard |
| Hardness : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Value Added Service : | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Fe 74.35% | Cr 11.75% | Ni 11.0% | Ti 1.65% | Mo 2.05% | |||||
| Mn <=0.25% | Si <=0.25% | C <=0.020% | P <=0.015% | N <=0.010% | |||||
| S 0.010% | |||||||||
| Property | Minimum | Maximum | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Yield Strength Range (Rp0.2 Offset) (ksi) | 170 | 270 | |||||||
| Tensile Strength Range (Rm) (ksi) | 190 | 280 | |||||||
| Elongation (AL=5 x Ø) | 2.3% | 14.0% | |||||||
| Brinell Hardness (H) | 271 | 560 | |||||||
| Modulus of Elasticity (ksi) (E): 32000 | |||||||||
| Machineability General Index: Unknown | |||||||||
Contact us to get a quick quote for your requirement.
SS 465 Cold Rolled Sheets are widely demanded, high-quality, and corrosion-resistant steel products that find a diverse application in multiple industries. These sheets are provided in different sizes, having different thicknesses, that range from 0.3mm to 3mm for excellent surface finish, strength, and precision for superior quality and performance in applications.
SS 465 Chequered Plates are heavy-duty stainless steel plates that have a raised, textured surface for anti-slip applications. They are widely found in industries where high corrosion resistance and structural strength is at a premium. Available in a wide range of sizes, such as 4×8 feet, custom sizes are also available.
SS 465 perforated plates are high-quality stainless steel sheets with precision holes to allow for airflow, drainage, and filtration. They are available in a wide range of sizes, usually in terms of thickness, from 0.5mm to 5mm and hole diameters ranging from 1mm to 25mm.
SS 465 Shim Sheets are high-quality stainless steel sheets. They are primarily used for applications requiring precise spacing and alignment. The shim sheets are usually offered in thickness ranging from 0.05mm to 1.00mm, and the best corrosion resistance is offered with an excellent durability to be used for critical engineering tasks.
SS 465 Polished Plates are made from stainless steel that is very shiny and polished on the surface. They come in various sizes. Generally, their thickness ranges between 3mm and 100mm, widths can be up to 1500mm, and lengths can go up to 6000mm.
Shashank Stainless is committed to providing a hassle-free customer experience. We provide critical documents, like commercial invoices, packing lists, fumigation certificates, heat treatment charts, quality assurance plans, and NABL-approved lab test reports with our high-grade Stainless Steel 465 Sheets and Plates. It ensures the legitimacy and high standard of our product, which will ensure trust and satisfaction in our respected customers. We also provide various test certificates on our Stainless Steel 465 Sheets and Plates including MTC complying with EN 10204/3.1b, PMI Test Certificate, 100% radiography test report, and Third Party Inspection Certificates. These certificates depict customer-centric approach, and the search for excellence for product quality never ends.
The highly strength, resistance to heat 465 stainless steel alloy is mainly used for any demanding application having excellent corrosion. SS 465 sheets and plates are widely demanded in aerospace industry, chemical processes, and for power generation units. They were used in majorly turbine blade, heat exchanger, vessel, and temperature valves due to their ability withstanding elevated temperature and corrosive environment. The alloy is resistant to oxidation and has good mechanical properties, making it a preferred choice for parts subjected to high stresses, thermal cycling, and aggressive chemical exposure.
©2024 Shashank Stainless All Rights Reserved.
